PS42 Stepper Actuator IMDC
PRO Series

Summary Details

Size: 42mm or Nema 17, 1.8°
Holding Torque: to 44 Ncm (62 oz-in)
Speed: to 35 RPS (2100 RPM)

Compact. Programmable.
The ElectroCraft integrated motor drive stepper linear actuator is a leap forward in actuator technology. This is linear motion in its most compact form, enabling users to reduce installation costs and machine footprint by installing simpler control and cabling architectures. The integrated PRO Series drive makes the PS42 highly configurable, incorporating the full range of sequence control, I/O and communications options. The PS42 is available with a range of 1/4 inch standard threads, providing resolutions of up to .00031 in (.00787 mm) in full step open-loop mode with a 200 PPR stepper motor with even higher resolutions available in micro-stepping and closed-loop position control mode. Other thread options are available on request. Versions with ballscrews and special material parts are available for custom application-specific designs.

PDF Brochure: Integrated Motor Drive Controller

Additional Product Details

PS42 Technical Drawings

PS42 Performance Data

PS42 Stack Size Models
Model Numbers PS42-A44
Holding Torque
(oz-in)
62
Holding Torque
(Ncm)
43.78
Length
(inches)
2.85
Length
(mm)
72.39
Rotor Inertia
(oz-in-sec2)
0.0009
Rotor Inertia
(kg-cm2)
0.0636
Phase Resistance
±10%
(Ohms)
1.3
Phase Inductance
±10%
(mH)
2.3
Weight
(oz)
16.6
Weight
(Kg)
0.5

Power Inputs
Motor Supply Voltage (VDC) 12-48
Logic Supply Voltage (VDC) 9-36
Control Inputs
AUX Analog Input (x1) 12-BIT, 0 - 5V
Digital inputs (x5)
Enable, 2 Limit Switches, Plus 2 General Purpose
5 - 36V, NPN
Control Outputs
Digital outputs (x2)
Status, Plus 1 General Purpose
5 - 36V, 0.5A, NPN open Collector
Operation Modes
Operation Mode Single axis motion controller,
Intelligent slave executing I/O triggered motion sequences,
Multi-axis, distributed motion solution,
Intelligent slave executing network (RS232 or CAN) triggered motion sequences
Communications
Serial RS232
CAN CAN-bus 2.0
Environmental
Operating Temperature (°C) 0 - +40
Storage Temperature (°C) -40 - +80
Humidity Range Not Condensing (% Rh) 90
Protections
Hardware protections Short circuit - Phase to GND
Short circuit - Phase to Phase
Over-voltage
Under-voltage
I2t
Regulatory Compliance
CE IEC60529
UL UL508

PS42 Speed Curves

PS42 Accessories

Evaluation Kit
$photo
Model Number Description
2000710 PT42-A55V48A-0-X-CAN Open-loop Stepper
2000711 PT42-A55V48A-0-D-CAN Closed-loop Stepper
2000752 PT56-A106V48A-0-X-CAN Open-loop Stepper
2000753 PT56-A106V48A-0-D-CAN Closed-loop Stepper
2000712 PR42-A16V48A-0-D-CAN Closed-loop Brushless
2000713 PR42-A32V48A-0-D-CAN Closed-loop Brushless
2000754 PR60-A25V48A-0-D-CAN Closed-loop Brushless
2000755 PR60-A52V48A-0-D-CAN Closed-loop Brushless
2000714 PS42-A44V48A-0B4-X-CAN Open-loop Integrated Stepper Linear Actuator
2000715 PS42-A44V48A-0B4-D-CAN Open-loop Integrated Stepper Linear Actuator
2000756 PS56-A106V48A-0SB7-X-CAN Open-loop Integrated Stepper Linear Actuator
2000757 PS56-A106V48A-0SB7-D-CAN Closed-loop Integrated Stepper Linear Actuator
Mating Cables (3 meters)
$photo
Model Number Description
1001359 PRO Series IMD Interface Cable Kit
1001360 PRO Series IMD Power & I/O Cable Kit
Miscellaneous Accessories
$photo
Model Number Description
2000685 CompletePower Braking Module With External Bus Capacitance (13W, 4.7 Ohm)

PS42 User Manuals

Model Number User Manual
PS42-A44Download PDF (Drive User Manual)

ElectroCraft Rapid Delivery Program

Some versions of this product are available via ElectroCraft's Rapid Delivery Program. Lead times for these products are given in working days and stated below. Please note, these lead times may be exceeded during holiday periods or due to unforeseen circumstances. Always contact your local ElectroCraft representative for confirmation of availability.

Rapid delivery products are stocked in locations all over the World. If the product you require is not stocked in your region, you may request accelerated delivery from other areas. Please consult your local representative for more information.

Customers are responsible for all freight charges.

Rapid Delivery to:

Select the region where the product would be delivered to.

The Americas - View Cart

Part Number Description Add to Cart
PS42-A44V48A-0AB4-X-CAN NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, no encoder, 1/4"-16 ACME (1-start), 0.0625" lead Contact Sales
PS42-A44V48A-0AB4-D-CAN NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, 1000 line differential encoder, 1/4"-16 ACME (1-start), 0.0625" lead Contact Sales
2000714 2000714: PS42-A44V48A-0B4-X-CAN Open-loop Integrated Stepper Linear Actuator Contact Sales
2000714 2000714: PS42-A44V48A-0B4-X-CAN Open-loop Integrated Stepper Linear Actuator Contact Sales
2000715 2000715: PS42-A44V48A-0B4-D-CAN Open-loop Integrated Stepper Linear Actuator Contact Sales
2000715 2000715: PS42-A44V48A-0B4-D-CAN Open-loop Integrated Stepper Linear Actuator Contact Sales
PRO-SERIES IMDC EVAL KIT (PS42-A44V48A0AB4-D-CAN) Eval Kit - NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, 1000 line differential encoder, 1/4"-16 ACME (1-start), 0.0625" lead Buy Now
PRO-SERIES IMDC EVAL KIT (PS42-A44V48A0AB4-X-CAN) Eval Kit - NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, no encoder, 1/4"-16 ACME (1-start), 0.0625" lead Buy Now

Europe, the Middle East and Africa

Part Number Description Typical Lead Time
No products available

Asia

Part Number Description Typical Lead Time
PS42-A44V48A-0AB4-X-CAN NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, no encoder, 1/4"-16 ACME (1-start), 0.0625" lead 2 days
PS42-A44V48A-0AB4-D-CAN NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, 1000 line differential encoder, 1/4"-16 ACME (1-start), 0.0625" lead 2 days
PRO-SERIES IMDC EVAL KIT (PS42-A44V48A0AB4-D-CAN) Eval Kit - NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, 1000 line differential encoder, 1/4"-16 ACME (1-start), 0.0625" lead 2 days
PRO-SERIES IMDC EVAL KIT (PS42-A44V48A0AB4-X-CAN) Eval Kit - NEMA 17 Stepper-based Linear Actuator, Integrated Motor Drive Controller - 62 oz-in holdng torque, integrated PRO-Series programmable drive, no encoder, 1/4"-16 ACME (1-start), 0.0625" lead 2 days