SERVO PRODUCTS

Specializing in Permanent Magnet Brushless motion controls since 1983, Automotion offers a wide range of standard, custom, and semi-custom servo-amplifiers to meet your motion control needs.  Unit configurations come in everything from very economical single board velocity controls to programmable single-axis positioning servo systems, complete with built-in high voltage power supply, amplifier, and motion controller all in one box.

Standard Product Line

DIGITAL SERVO DRIVES
		ACS100 Digital AC Brushless Servo Drive Intelligent Low-Voltage Digital Motor Drive The ACS100 was driven by design to be one of the most space efficient low voltage digital brushless servo-amplifiers available.
		ACS200 Digital Brushless Drive Digital Low-Voltage Servo Amplifier Utilizing a DSP-based design architecture, the new servo ACS200 provides software selectable Torque, Velocity, or Position Mode operation. Sine wave commutation provides smooth torque at low speeds for demanding motion control requirements found in robotic, direct drive, and linear motor applications.
		ACS300 Digital Brushless Drive Digital Low-Voltage "2X Power" Servo Amplifier Driven by design to be one of the most space-efficient, low voltage digital brushless servo-amplifiers available, the ACS300 measures just 5.25" (133mm) by 3.4" (86mm) by 1.0" (25mm) overall, and weighing in at less than 8 oz. (222g) without a heatsink. This compact amplifier can output up to 1.8 kilowatts of peak power, over twice the power of our previous LV servo drive models.
		ACE500 Digital Brushless Drive Digital High-Voltage Servo Amplifier The ACE500 is the newest addition to Automotion's AC "Smart" series of all digital servo-amplifiers designed to provide today's OEM with maximum brushless servo performance at the lowest possible cost.
		ACE1200 Digital Brushless Drive Digital High-Voltage Servo Amplifier The ACE1200 is part of Automotion's AC "Smart" series of all digital servo-amplifiers designed to provide today's OEM with maximum brushless servo performance at the lowest possible cost.
		ACE1300 Digital Brushless Drive Digital High-Voltage Servo Amplifier The ACE1300 is part of Automotion's AC "Smart" series of all digital servo-amplifiers designed to provide today's OEM with maximum brushless servo performance at the lowest possible cost.

LEGACY DRIVES
		IDS1000 Series Brushless Drives Intelligent Digital Servo Automotion's IDS (Intelligent Digital Servo) series of "Smart" current mode servo amplifiers incorporate the latest advancements in drive resident microprocessor technology. Coupling the benefits of digital intelligence to the reliability and safety of a UL, CSA, and IEC (min 3000 VAC Hi Pot) compliant power stage, our IDS drives are the Smart choice for OEM embedded single and multi-axis motion and machine control.
		DPS Power Block Series Brushless Drives Digital Power Stage Automotion's Digital Power Stage (DPS) series for OEM embedded servo motion control applications offers the same core power-amplifier technology incorporated into the highly successful IPS and IDS brushless DC product lines as a stand-alone component. Incorporating over 15 years of power electronics design and manufacturing experience, Automotion's Digital Power Stage product series offers the OEM motion engineer a tested and field proven servo-amplifier power platform for directly embedding his proprietary control functionality.
		ISS Series Brushless Drives Intelligent Sensorless Servo The ISS series, a new family of high performance sensorless, brushless DC servo controllers, is designed for sensorless closed-loop velocity control of a three phase brushless DC motor. Using the latest advancements in DSP processing capability this intelligent controller requires no feedback devices in the motor. Only a single power cord connection is required between motor and controller. Using an especially developed proprietary sensorless flux vector algorithm the controller can regulate motor speed to within +/- 0.1% (i.e. +/-5 RPM out of 5000 RPM) with varying loads.
		IPS1000 Series Servo Amplifiers Intelligent Positioning Servo Automotion's family of high performance brushless servo positioning drives offer Torque, Velocity, and Positioning capabilities - an all-in-one compact OEM package. The new IPS intelligent positioning servo series is designed for a variety of OEM servo motion control applications. Electronic Gearing, Cam Following, Step Motor Emulation, Analog Input Velocity, Torque Control, and Stored Motion Sequencing are just a few of the user applications the new IPS system can handle. All servo and application parameters are set digitally to guarantee repeatable results without the typical long term drift problems associated with analog systems.
		ALC-CM "R" Series Servo Amplifiers ALC-CM "E" Series Servo Amplifiers Current Mode Servo-Amplifiers The ALC-CM "R" torque mode servo-amplifier series provides improved safety, better noise immunity and lower EMI than any previous generation of Automotion servo-amplifiers.
		ALC253X Series Servo Amplifiers Velocity Drive The ALC Voltage Mode amplifier is a stand alone, OEM drive platform, using a space efficient design to combine economy with flexibility and performance.  Operating voltage ranges have been widened to allow operation worldwide.  Basic drive design and component features have been selected to allow easy agency recognition, both domestic and European. I/O is all digital and completely isolated.  A heavy duty regen circuit, using an external shunt resistor, handles large inertia loads in either dynamic or 4 quadrant braking.
		LC4/5 Plus Velocity Drives The LC4/5 PLUS Series, our popular line of PWM voltage mode drives run directly from either 115 VAC, single phase (LC4) or 208/230 VAC, single phase (LC5).

SPECIALTY DRIVES
		PFC3000 Drive Power Factor Correction Module Today's AC line operated servo-amplifiers employ full wave rectification with capacitor input filtering for motor rail power. They draw current in short, high amplitude bursts near the peak of the line voltage sinusoid.  This can result in cost penalties, especially at higher power.  Excessive peak current flow may be imposed on the AC line service leading to limits on the power available and requiring costly increases in the AC service capability (assuming this is even practical).

SERVO MOTORS
		Mavilor Brushless Servo Motors AC Servo Motors The BL Series are synchronous electrical servomotors, with 3 winding phases, supplied with Sinusoidal or Trapezoidal current wave forms. The Feed-Back devices that produce the synchronization signal and speed (position, also in the Sinusoidal case), are a Resolver (BLS Series) or a Hall Effect devices (BLT Series).

Custom Products

Ask for a quote. For Custom Product/Application inquiries, click here to supply us with the details of your application specs. In conjunction with your production needs, Automotion will look at both a customized version of one of our existing standard drives, as well as a complete - "from the ground up" - custom solution to fit your specific needs.

Click here to request a quote for a Custom Product.